The original LV airplane jacket fabric is made of 202S202S special weave high-density plain canvas. The weight is 190G. It only took 3 times of coloring. The graininess on the surface of the cloth is very obvious and the hand feels stiff. It takes 20 days from the custom-woven embryonic fabric to the dye vat to use imported environmentally friendly dyes. The price of the dyes on the market is many times higher. After the vat is finalized, it still needs to be mercerized and sanded in the later stage. The whole process of shipping the light fabric takes 45 days. The lining is made of 4040 high-density fine twill, right twill, and the same color as zp. It is colored twice. The 25-day embroidery cycle uses 75D imported matte polyester threads with the original white thread color. The pocket embroidery was modified more than 10 times. Due to the warp and weft yarn problems of the fabric, it was difficult to stabilize the embroidery head, so a hot-melt film was used on the top and imported lining paper was padded on the bottom to better increase the growth. The stability of the embroidery and the fullness of the embroidery. The two O's on the chest are both irregular circles. During the pattern making process, the starting point of the needle is set to be consistent with the starting point of the sample. The sharp corners and rounded corners of the entire embroidery will match the sample. The entire embroidery is positioned uniformly and centered, and the cloth is spread using infrared rays to reduce the positioning error to 0102. The special particle needle embroidery on the back is composed of 530 small embroideries. A total of 2W needles and one small letter embroidery is 45 needles. The loss of the machine is very large and cannot enter a high-speed operation. Every time a small embroidery is finished, it takes 2 hours to cut and stitch the whole piece of clothing. The whole piece of clothing is made of denim craftsmanship. The chain on the collar is independently molded and has the same shape as zp. It is different from the ready-made chain fixing chain on the market. The double-sided suede is cut according to the original size and the width is consistent with the original. The buttons are individually cut into 4 molds. The letter shape and the letter opening direction are consistent with zp. The silver bottom surface of the key button center is aligned with the letters. All buttons are consistent. This requires manual alignment and hammering of special 6-corner buckles one by one. Custom-made individually. Attempting to manually fasten the buckles is not as neat and beautiful as the sample. The entire garment has been inspected 4 times before being packaged. SIZE LXLXXL